+49 89 4623 0710 | +44 1707 280 028 | sales@eurocoincomponents.com

Search Products...
Generic filters
Filter by Custom Post Type
Latest News
Promotions & Offers
Supporting Articles
  • No products in the list

Disinfecting Touch Sensors

Disinfecting Touch Sensors


Article courtesy of Zytronic and 3M

Cleaning and disinfecting are two distinct processes. Cleaning removes dirt, grease, dust and other contaminants. Disinfecting is a separate process that uses a chemical designed to destroy bacteria and enveloped viruses (such as coronavirus).

It is recommended that the procedure for cleaning surfaces suggested by the Health & Safety Executive is followed, and that appropriate personal protective equipment (PPE) is used, to minimise risk to the person cleaning the touchscreen from the chemicals used.

The frequency of cleaning the touch sensor will be dependent upon the use and location of the touchscreen device and should be determined by the equipment owner.

Resolution / Action

Step 1

We currently recommend cleaning the sensors with a mixture of 70% isopropanol and 30% water. Higher alcohol content is not recommended. If you have a branded disinfectant, please read manufacturer’s instructions carefully. Many disinfectant manufacturers require the surface to remain wet for a few minutes, so continuous wiping might be required.

Check the label to ensure the product has been tested against bacteria and viruses. Not all household cleaning products contain virus-killing active ingredients. Some antibacterial products may not be effective against viruses, so it's important to select a product that states: 'Kills 99.9% bacteria and viruses' on the packaging.

Step 2

To prepare for disinfecting the touchscreen, power down the device (if possible) or ensure your on-screen software can tolerate false touches while you clean.

Step 3

If your kiosk or terminal is not fully sealed against liquid ingress, you should avoid spraying the touch sensor directly. Instead, use wet wipes, a sprayed cloth or a dampened cloth with the excess moisture squeezed off.

Dampen a new clean, non-abrasive cloth with a disinfectant chosen from the list below. Ensure excess liquid is squeezed from the cloth. You may also use pre-dampened wipes.

For disinfectant solutions that are safe for use with touch sensors, see below:

  • Household bleach solution (sodium hypochlorite, mixed to 1/3 cup of bleach per gal. of water)
  • Household cleaners (containing >70% alcohol)
  • Household cleaners (containing >3% hydrogen peroxide)
  • Isopropyl alcohol (containing 70% alcohol)
  • Methyl Alcohol or Ethyl Alcohol (containing 70% alcohol)

More information from the Public Health England on disinfecting procedures for Coronavirus Disease 2019 (COVID-19) can be found here: https://www.gov.uk/government/publications/covid-19-decontamination-in-non-healthcare-settings/covid-19-decontamination-in-non-healthcare-settings

Do NOT use the following materials when cleaning/disinfecting your Zytronic touch sensor (glass):

• 100% Methyl, Ethyl or Isopropanol Alcohol
• Thinner or benzine
• Strong alkalis
• Strong solvents
• Acids
• Abrasive cleaners
• Detergents with abrasives
• Steel wool
• Sponges with abrasives
• Steel blades
• Cloth with steel threads

Additional Info

For additional technical assistance, please contact us at support@eurocoincomponents.com.

This technical bulletin describes the recommended cleaning procedure for Zytronic glass touch sensors.

Knowledge Base

Find solutions to your technical questions here.

Tech Blog

Read the latest technology discussions here.

Data Sheets and Manuals

Browse our technical support help desk.

Repair Quote

Get a quote for component repairs.

Return Request Form

Fill out our online returns form quickly and easily.

Contact Us

Still can’t find what you’re looking for? Contact us here.